{ "Steel Grey": "abb5b9", "Graphite": "5b524e", "Gun Metal": "5b524e", "Natural": "e5f2ed", "Dessert Sand": "cbc39b", "Cherry Red": "c82927" }

Kits

TOJA GRID- Side Pergola Kit with Sail Shade 1

wall mount pergola kit with shade sail for 4x4 wood posts

$640.00

pergola kit with shade sail for 4x4 wood posts

$840.00

double wall mount pergola kit with 2 shade sails for 4x4 wood posts

$1,180.00

pergola kit with post wall for 4x4 wood posts

$1,240.00

double pergola kit with 2 shade sails for 4x4 wood posts

$1,480.00

2 person hammock kit for 4x4 wood posts

$1,400.00

wall mount pergola kit with shade sail for 6x6 wood posts

$840.00

pergola kit with shade sail for 6x6 wood posts

$1,140.00

double wall mount pergola with 2 shade sails for 6x6 wood posts

$1,455.00

pergola kit with post wall for 6x6 wood posts

$1,540.00

TOJA GRID - Double Pergola Kit Product Image

double pergola kit with 2 shade sails for 6x6 wood posts

$1,980.00

2 person hammock kit for 6x6 wood posts

$1,720.00

2 person hammock kit for 4x4 wood posts

The Toja Grid offers a modern approach to style & design. Our Double Hammock Kit is perfect for any outdoor living space. Quick and easy to assemble in under 2 hours! Brackets fit with standard 4x4 wood posts

The Toja Grid offers a modern approach to style & design along with affordability, quick assembly, and quality craftsmanship.

*Key Note* 4x4 is a size reference. The most common wood is actually 3.5" x 3.5" with rounded edges. Some types have sharp edges or are a true 4"x4" and will not fit. Also note that fresh pressure treated wood or wet wood will be swollen, we advise installing with dry wood

*TIP* - we often take a solo bracket with us when purchasing lumber, slide it on the ends of the wood to ensure proper fit

Included in the kit:
- 8x TRIO corner brackets
- 1x DOUBLE HAMMOCK kit
- 2x 8x8 SHADE SAIL
- All screws & brackets to connect our parts to wood

Excluded from the kit
- Surface securing hardware
- Wood

Metal Parts:
- 14 gauge zinc coated steel
- 10 year outdoor powder coating
- #12 wood screws included

Shade Fabric:
- 100% Synthetic HDPE (high density polyethylene) knitted fabric
- Stain resistant and will not mold or mildew
- Strong tension straps and buckles to pull the shade tight and flat
- 5 minutes to take down for winter / major storms
- All hardware included to attach to wood
- *Note* the unfolded size will seem small, if you're checking the size, please pull the shade as tight as you can and then measure it

Hammock Kit

Made of Challenge Sailcloth, please follow the link for more info! http://www.challengesailcloth.com/fastnet/ Rated to hold 500lbs of static evenly distributed weight. Each corner is reinforced with 3 bands of webbing wrapped around a heavy-duty marine grade stainless steel O-ring. 4 marine grade turnbuckles included to secure the O-ring to the GRID hangers, which are installed by 8 screws to each wood post

Hammock Kit:
- 8x TRIO corner brackets
- 1x DOUBLE HAMMOCK kit

Hammock Kit + Top shade:
- 8x TRIO corner brackets
- 1x DOUBLE HAMMOCK kit
- 1x 8x8 Top Shade

Hammock Kit + Top shade + Side shade:
- 8x TRIO corner brackets
- 1x DOUBLE HAMMOCK kit
- 1x 8x8 Top Shade
- 1x 8x8 Side Shade

Excluded from the kits:
- Wood

How do you say TOJA?

Toy - Yah

What type of wood should I use?

Any standard dry straight 4x4 wood will work. Our products were made to assemble with standard 8ft, 10ft and 12ft lengths available at most lumber yards.
Note: 4x4 wood is in fact 3.5” x 3.5” - the industry simply calls it 4x4.
We suggest cedar, however pressure-treated, engineered, tiger wood, and even IPE will work.

What are the outside dimensions?

For Pergolas: add 10”, this 10" includes the cavity in the brackets as well as the 1" flange on the SOLO (where the securing screws go)
For Hammocks: The outside dimensions are 104"x104", height is at your discretion, however, suggest to build a cube, simply looks cool.
If you're building a double or larger structure, please add 3.75" for each additional quad or quint added. ***NOTE, this additions if for the footprint, not the wood used***

SHADE - How long are the straps?

All lot of customers are asking about custom sizes. Please note that the shade straps can extend the shade up to 8" more than it's intended size.
8ft to 8ft 8" / 10ft to 10ft 8" / 12ft to 12ft 8"

What is the shade made of?

Our shades are made of HDPE, the same resilient material used to produce heavy-duty storage totes. Toja Grid shades are made with monofilament and tape construction, as well as knitted and pre-stretched to provide a strong long-lasting shade.
Buckles are added every 3 to 4 feet, and each buckle has a 100 lb. tension capacity to pull the shade tight and hold up to the elements.
Please take shades down in high winds and winter.

Are the shades waterproof?

No, they are not. They will stop a misting, but rain will pass through.
Shades block 85%+ of UVA / UVB rays.
Toja Grid shades also reduce wind, only letting 15% of air pass through.

What hardware to do I need to buy?

All the hardware you need is included in each box to connect our brackets to the 4x4 wood posts.
The only hardware you need is the securing hardware, as we do not know where you will install your structure.

I’m buying the QUAD and I only need 2 SOLO’s but they only come in a 4 pack.

The Quad includes the 2 SOLO’s, and all the hardware.
Note that the Quad 1 pack, also comes with 2 SOLO's

Do you do custom sizes?

For custom sizes, we've added an item based on the square feet needed, if you require more details, please email us: info@tojagrid.com
Note: Custom sizes take 3 to 4 weeks before shipping.
Note: We can make shades to any size, however, our warranty only applies to shades up to 12ft in length.

Is there a dealer near me? I’d like to see it in person before I make a purchase.

For stores near you please visit our Store Locator
To watch a more detailed introduction to the product, check out our instructional videos on YouTube

Where can I mount my Toja Grid?

We always advise our customers to check your local building codes prior to mounting your Toja Grid pergolas and Hammocks.
View our Instagram page for inspiration and examples of where others have built their GRID system!

Do you ship to the USA?

Yes we ship all over North America, freight is free to most destinations

I have a store, how do I become a dealer?

Please email us at todd@tojagrid.com for more information.

Video Not Available

The Toja Grid offers a modern approach to style & design along with affordability, quick assembly, and quality craftsmanship.

*Key Note* 4x4 is a size reference. The most common wood is actually 3.5" x 3.5" with rounded edges. Some types have sharp edges or are a true 4"x4" and will not fit. Also note that fresh pressure treated wood or wet wood will be swollen, we advise installing with dry wood

*TIP* - we often take a solo bracket with us when purchasing lumber, slide it on the ends of the wood to ensure proper fit

Included in the kit:
- 8x TRIO corner brackets
- 1x DOUBLE HAMMOCK kit
- 2x 8x8 SHADE SAIL
- All screws & brackets to connect our parts to wood

Excluded from the kit
- Surface securing hardware
- Wood

Metal Parts:
- 14 gauge zinc coated steel
- 10 year outdoor powder coating
- #12 wood screws included

Shade Fabric:
- 100% Synthetic HDPE (high density polyethylene) knitted fabric
- Stain resistant and will not mold or mildew
- Strong tension straps and buckles to pull the shade tight and flat
- 5 minutes to take down for winter / major storms
- All hardware included to attach to wood
- *Note* the unfolded size will seem small, if you're checking the size, please pull the shade as tight as you can and then measure it

Hammock Kit

Made of Challenge Sailcloth, please follow the link for more info! http://www.challengesailcloth.com/fastnet/ Rated to hold 500lbs of static evenly distributed weight. Each corner is reinforced with 3 bands of webbing wrapped around a heavy-duty marine grade stainless steel O-ring. 4 marine grade turnbuckles included to secure the O-ring to the GRID hangers, which are installed by 8 screws to each wood post

Hammock Kit:
- 8x TRIO corner brackets
- 1x DOUBLE HAMMOCK kit

Hammock Kit + Top shade:
- 8x TRIO corner brackets
- 1x DOUBLE HAMMOCK kit
- 1x 8x8 Top Shade

Hammock Kit + Top shade + Side shade:
- 8x TRIO corner brackets
- 1x DOUBLE HAMMOCK kit
- 1x 8x8 Top Shade
- 1x 8x8 Side Shade

Excluded from the kits:
- Wood

How do you say TOJA?

Toy - Yah

What type of wood should I use?

Any standard dry straight 4x4 wood will work. Our products were made to assemble with standard 8ft, 10ft and 12ft lengths available at most lumber yards.
Note: 4x4 wood is in fact 3.5” x 3.5” - the industry simply calls it 4x4.
We suggest cedar, however pressure-treated, engineered, tiger wood, and even IPE will work.

What are the outside dimensions?

For Pergolas: add 10”, this 10" includes the cavity in the brackets as well as the 1" flange on the SOLO (where the securing screws go)
For Hammocks: The outside dimensions are 104"x104", height is at your discretion, however, suggest to build a cube, simply looks cool.
If you're building a double or larger structure, please add 3.75" for each additional quad or quint added. ***NOTE, this additions if for the footprint, not the wood used***

SHADE - How long are the straps?

All lot of customers are asking about custom sizes. Please note that the shade straps can extend the shade up to 8" more than it's intended size.
8ft to 8ft 8" / 10ft to 10ft 8" / 12ft to 12ft 8"

What is the shade made of?

Our shades are made of HDPE, the same resilient material used to produce heavy-duty storage totes. Toja Grid shades are made with monofilament and tape construction, as well as knitted and pre-stretched to provide a strong long-lasting shade.
Buckles are added every 3 to 4 feet, and each buckle has a 100 lb. tension capacity to pull the shade tight and hold up to the elements.
Please take shades down in high winds and winter.

Are the shades waterproof?

No, they are not. They will stop a misting, but rain will pass through.
Shades block 85%+ of UVA / UVB rays.
Toja Grid shades also reduce wind, only letting 15% of air pass through.

What hardware to do I need to buy?

All the hardware you need is included in each box to connect our brackets to the 4x4 wood posts.
The only hardware you need is the securing hardware, as we do not know where you will install your structure.

I’m buying the QUAD and I only need 2 SOLO’s but they only come in a 4 pack.

The Quad includes the 2 SOLO’s, and all the hardware.
Note that the Quad 1 pack, also comes with 2 SOLO's

Do you do custom sizes?

For custom sizes, we've added an item based on the square feet needed, if you require more details, please email us: info@tojagrid.com
Note: Custom sizes take 3 to 4 weeks before shipping.
Note: We can make shades to any size, however, our warranty only applies to shades up to 12ft in length.

Is there a dealer near me? I’d like to see it in person before I make a purchase.

For stores near you please visit our Store Locator
To watch a more detailed introduction to the product, check out our instructional videos on YouTube

Where can I mount my Toja Grid?

We always advise our customers to check your local building codes prior to mounting your Toja Grid pergolas and Hammocks.
View our Instagram page for inspiration and examples of where others have built their GRID system!

Do you ship to the USA?

Yes we ship all over North America, freight is free to most destinations

I have a store, how do I become a dealer?

Please email us at todd@tojagrid.com for more information.

Video Not Available

Free Shipping!

wall mount pergola kit with shade sail for 4x4 wood posts

How do you say TOJA?

Toy - Yah

What type of wood should I use?

Any standard dry straight 4x4 wood will work. Our products were made to assemble with standard 8ft, 10ft and 12ft lengths available at most lumber yards.

Note: 4x4 wood is in fact 3.5” x 3.5” - the industry simply calls it 4x4.

We suggest cedar, however pressure-treated, engineered, tiger wood, and even IPE will work.

What are the outside dimensions?

For Pergolas: add 10”, this 10" includes the cavity in the brackets as well as the 1" flange on the SOLO (where the securing screws go)

For Hammocks: The outside dimensions are 104"x104", height is at your discretion, however, suggest to build a cube, simply looks cool.

If you're building a double or larger structure, please add 3.75" for each additional quad or quint added. ***NOTE, this additions if for the footprint, not the wood used***

SHADE - How long are the straps?

All lot of customers are asking about custom sizes. Please note that the shade straps can extend the shade up to 8" more than it's intended size.

8ft to 8ft 8" / 10ft to 10ft 8" / 12ft to 12ft 8"

What is the shade made of?

Our shades are made of HDPE, the same resilient material used to produce heavy-duty storage totes. Toja Grid shades are made with monofilament and tape construction, as well as knitted and pre-stretched to provide a strong long-lasting shade.

Buckles are added every 3 to 4 feet, and each buckle has a 100 lb. tension capacity to pull the shade tight and hold up to the elements.

Please take shades down in high winds and winter.

Are the shades waterproof?

No, they are not. They will stop a misting, but rain will pass through.

Shades block 85%+ of UVA / UVB rays.

Toja Grid shades also reduce wind, only letting 15% of air pass through.

What hardware to do I need to buy?

All the hardware you need is included in each box to connect our brackets to the 4x4 wood posts.

The only hardware you need is the securing hardware, as we do not know where you will install your structure.

I’m buying the QUAD and I only need 2 SOLO’s but they only come in a 4 pack.

The Quad includes the 2 SOLO’s, and all the hardware.

Note that the Quad 1 pack, also comes with 2 SOLO's

Do you do custom sizes?

For custom sizes, we've added an item based on the square feet needed, if you require more details, please email us: info@tojagrid.com

Note: Custom sizes take 3 to 4 weeks before shipping.

Note: We can make shades to any size, however, our warranty only applies to shades up to 12ft in length.

Is there a dealer near me? I’d like to see it in person before I make a purchase.

For stores near you please visit our Store Locator

To watch a more detailed introduction to the product, check out our instructional videos on YouTube

Where can I mount my Toja Grid?

We always advise our customers to check your local building codes prior to mounting your Toja Grid pergolas and Hammocks.

View our Instagram page for inspiration and examples of where others have built their GRID system!

Do you ship to the USA?

Yes we ship all over North America, freight is free to most destinations

I have a store, how do I become a dealer?

Please email us at todd@tojagrid.com for more information.

How do you say TOJA?

Toy - Yah

What type of wood should I use?

Any standard dry straight 4x4 wood will work. Our products were made to assemble with standard 8ft, 10ft and 12ft lengths available at most lumber yards.

Note: 4x4 wood is in fact 3.5” x 3.5” - the industry simply calls it 4x4.

We suggest cedar, however pressure-treated, engineered, tiger wood, and even IPE will work.

What are the outside dimensions?

For Pergolas: add 10”, this 10" includes the cavity in the brackets as well as the 1" flange on the SOLO (where the securing screws go)

For Hammocks: The outside dimensions are 104"x104", height is at your discretion, however, suggest to build a cube, simply looks cool.

If you're building a double or larger structure, please add 3.75" for each additional quad or quint added. ***NOTE, this additions if for the footprint, not the wood used***

SHADE - How long are the straps?

All lot of customers are asking about custom sizes. Please note that the shade straps can extend the shade up to 8" more than it's intended size.

8ft to 8ft 8" / 10ft to 10ft 8" / 12ft to 12ft 8"

What is the shade made of?

Our shades are made of HDPE, the same resilient material used to produce heavy-duty storage totes. Toja Grid shades are made with monofilament and tape construction, as well as knitted and pre-stretched to provide a strong long-lasting shade.

Buckles are added every 3 to 4 feet, and each buckle has a 100 lb. tension capacity to pull the shade tight and hold up to the elements.

Please take shades down in high winds and winter.

Are the shades waterproof?

No, they are not. They will stop a misting, but rain will pass through.

Shades block 85%+ of UVA / UVB rays.

Toja Grid shades also reduce wind, only letting 15% of air pass through.

What hardware to do I need to buy?

All the hardware you need is included in each box to connect our brackets to the 4x4 wood posts.

The only hardware you need is the securing hardware, as we do not know where you will install your structure.

I’m buying the QUAD and I only need 2 SOLO’s but they only come in a 4 pack.

The Quad includes the 2 SOLO’s, and all the hardware.

Note that the Quad 1 pack, also comes with 2 SOLO's

Do you do custom sizes?

For custom sizes, we've added an item based on the square feet needed, if you require more details, please email us: info@tojagrid.com

Note: Custom sizes take 3 to 4 weeks before shipping.

Note: We can make shades to any size, however, our warranty only applies to shades up to 12ft in length.

Is there a dealer near me? I’d like to see it in person before I make a purchase.

For stores near you please visit our Store Locator

To watch a more detailed introduction to the product, check out our instructional videos on YouTube

Where can I mount my Toja Grid?

We always advise our customers to check your local building codes prior to mounting your Toja Grid pergolas and Hammocks.

View our Instagram page for inspiration and examples of where others have built their GRID system!

Do you ship to the USA?

If you're building a double or larger structure, please add 3.75" for each additional quad or quint added. NOTE, this additions if for the footprint, not the wood used

If you're building a double or larger structure, please add 3.75" for each additional quad or quint added. NOTE, this additions if for the footprint, not the wood used

If you're building a double or larger structure, please add 3.75" for each additional quad or quint added. NOTE, this additions if for the footprint, not the wood used

If you're building a double or larger structure, please add 3.75" for each additional quad or quint added. NOTE, this additions if for the footprint, not the wood used